BLVLL - REAGENT SOLUTION 44
- MSDS: BLVLL
- Manufacturer: PARKER AND AMCHEM HENKEL CORP
- Product Name: REAGENT SOLUTION 44
- National Stock Number: 6810-00N020086
Product Identification
Product ID:REAGENT SOLUTION 44
MSDS Date:12/12/1990
FSC:6810
NIIN:00N020086
MSDS Number: BLVLL
Responsible Party
MADISON HEIGHTS, MI 48071
US
Emergency Phone: 517-263-9430
Info Phone: 313-583-9300
Cage: HO630
Contractor
Telephone: 313-583-9300
Cage: HO630
Ingredients
SULFURIC ACID
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 50%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3;3 MG/M3 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50 - 55%
BRTHG IS DFCLT, ADMIN O*2. IF RESP STOPS, GIVE
RTECS: 9999999ZZ
DISP OF PROD, DILUTION W/H*2O & NEUT &
RTECS: 9999999ZZ
COMPLIANCE W/ALL APPLICABLE FEDERAL, STATE & LOCAL
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CONTACT WILL CAUSE SEVERE BURN &
POSSIBLE BLINDNESS. SKIN:CONTACT W/SKIN OR MUCOUS MEMBRANE WILL
CAUSE SEVERE BURNS & POSSIBLE ULCERATION. INGEST:CAN RESULT IN
GASTROINTESTINAL DAMAGE; BURNS OF D IGESTIVE TRACT. INHAL:INHAL OF
MIST CANCAUSE INJURY (BURNS) TO RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO INFORMATION AVAILABLE.
First Aid
First Aid:EYES:IMMED FLUSH IN DIRECTED STREAM OF H2O FOR @ LST 15 MIN
WHILE FORCIBLY HOLDING EYELIDS APART TO ENSURE COMPLETE IRRIGATION
OF ALL EYE & LID TISS. GET MD. SKIN:IMMED REMOVE CONTAM CLTHG &
SHOES. FL USH THORO W/H2O FOR @ LST 15 MIN. RINSECLHTG. IF IRRIT
PERSISTS, GET MD. INGEST:DRINK LG QTYS OF H2O. CORR. DO NOT INDUCE
VOMIT. IF VOMIT OCCURS, DRINK MORE H2O. GET MD. NEVER GIVE(SEE SUPP
DATA)
Fire Fighting
Flash Point:NONE
Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AT DECOMP TEMP, SULFUR DIOXIDE FUMES MAY
BE EMITTED. CAN REACT W/METALS TO FORM FLAMM HYDROGEN GAS. CONTAINS
SULFURIC ACID WHICH IS NON-FLAMM, HOWEVER, (SUPDAT)
Accidental Release
Spill Release Procedures:VENTILATE AREA. WEAR PROTECTIVE CLOTHING. DIKE
TO CONTAIN SPILL. ABSORB ON NON-COMBUSTIBLE MATERIAL (VERMICULITE,
SAND, EARTH) & STORE IN SUITABLE DRUM.
Neutralizing Agent:SODA ASH OR LIME.
Handling
Handling and Storage Precautions:DO NOT GET IN EYES, ON SKIN OR ON
CLOTHING. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY. STORE IN
COOL PLACE AWAY FROM ALKALINE MATERIALS.
Other Precautions:STORE SEPARATE FROM ORGANIC MATERIALS, METALLIC
POWDERS, CHROMATES, CHLORATES, NITRATES, CARBIDES, OXIDIZING
MATERIALS.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED FOR REAGENT SOLUTIONS.
Ventilation:LOCAL EXHAUST VENTILATION.
Protective Gloves:NEOPRENE OR POLYVINYL GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSCHLD.
Other Protective Equipment:APPROPRIATE PROTECTIVE CLOTHING. EYE WASH
FACILITY & EMERGENCY SHOWER SHOULD BE IN CLOSE PROXIMITY.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXPLO HAZ:IT IS A STRONG OXIDIZING AGENT & MAY CAUSE IGNIT BY CNTCT
W/COMBUST MATL. DO NOT ADD H2O/OTHER LIQ TO PROD IN FIRE. COOL
EXTERIOR OF CNTNR W/H2O. MATLS TO AVOID:SHOULD ALWAYS BE ADDED
SLOWLY TO H2O. FIRST AID PROC:ANYTHING BY MOUTH TO UNCON PERS.
INHAL:REMOVE TO FRESH AIR & REMOVE CONTAM CLTHG. IF (ING 3)
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:>210F,>99C
Spec Gravity:1.35-1.45
pH:1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID, NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
KEEP SEPARATE FROM ALKALIES. ORG MATLS, PAINT THINNERS/REDUCING AGENTS.
MATL REACTS EXOTHERMICALLY W/WATER. CHEM(SUPDAT)
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SULFUR OXIDES.
Disposal
Waste Disposal Methods:CHEM IS HAZ WASTE AS DEFINED BY EPA HAZ WASTE &
CONSOLIDATED PERMIT REGS. WASTE TREATMENT & NEUT MAY BE REQD PRIOR
TO DISCHARGE TO SEWER. NOTE:DISCHARGE OF PROD TO SEWER MAY CAUSE
DETERIORATION OF TIL E/METAL COMPONENTS. SHOULD IT BE NEC TO(INGRED
4)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.